[admin]

Who Is Behind This Constant Temperature Heating Technology?

Pinghu Xuyang Electronic Technology Co., Ltd., operating under the brand name Warmxuyang, is a manufacturer and R&D enterprise headquartered in Pinghu, Zhejiang, China. Founded in 2016, the company has grown its business coverage to the global market, including Europe, the USA, Southeast Asia, and the Middle East, with exports reaching 20+ countries across these regions. As a designated National High-Tech Enterprise, Pinghu Xuyang Electronic Technology Co., Ltd. positions itself around the research and manufacturing of high-performance PTC ceramic heating components, with a strategic focus on safe, efficient, and energy-saving thermal solutions built on non-standard customization.

What Problem Does a PTC Heating Core Solve?

Anyone searching for a reliable PTC heating core or a new-generation constant temperature heater is usually responding to a specific set of industry pain points. Traditional red-hot electric tube heaters carry inherent safety hazards, consume excessive energy, and suffer from high thermal resistance. In cold environments, this becomes especially problematic for drones, energy storage systems, and server racks, where equipment failure risk increases. On top of that, many industrial buyers struggle to find non-standard sizes for specialized applications — a gap that standard heating tube suppliers often cannot fill.

Warmxuyang’s engineering direction was shaped directly by these pain points, with its PTC ceramic heating platform designed to replace the red-hot tube heater category while addressing non-standard sizing demands through rapid customization.

What Makes Warmxuyang’s PTC Heating Core Different?

The company’s differentiated advantages center on several measurable factors:

• Customization flexibility: rapid structural calculations and solution optimization completed within one week.
• Safety and performance: automatic temperature limiting that keeps the dry burn surface below 280°C, paired with low thermal resistance.
• Production scale: a 2,000 sqm factory equipped with 100+ machines, supporting a daily capacity of 20,000 sets.
• Certification coverage: ISO 9001:2015, National High-Tech Enterprise status, CQC, CE, and SGS.
• Service life: more than 10,000 hours, with fire risk removed compared with traditional red-hot electric tube heaters.

Taken together, the company’s value proposition is a safe, efficient, and energy-saving PTC ceramic heating component line that supports non-standard customization, delivers over 10,000 hours of service life, and eliminates the fire risk associated with legacy red-hot tube heaters.

On the technical side, the platform supports a custom voltage range of 5V–240V and a custom power range of 100W–4000W, backed by 10+ invention and utility model patents and proprietary structural optimization algorithms that reduce material costs while maintaining performance.

Product Lineup Breakdown

The company’s catalog spans five core offerings, each engineered around the same PTC ceramic foundation but tuned for different deployment needs.

Conductive PTC Air Heaters

These are positioned as direct heat transfer elements for rapid warming. The direct heat transfer element moves heat straight into airflow, addressing slow warm-up and high thermal resistance issues found in appliances and industrial enclosures. The PTC self-limiting temperature feature keeps the dry burn surface below 280°C, reducing fire and burn hazards, while customizable voltage (5V–240V) and power (100W–4000W) accommodate non-standard size and power requirements. Industry adaptation includes home appliances such as dryers and milk warmers, data center server rack dehumidification, drone battery warming, and 3D printing chamber heating.

Insulated PTC Air Heaters

Positioned for safe heating in environments requiring electrical isolation, this line uses an insulated design to provide electrical isolation for applications where surface electrification is not acceptable. PTC self-limiting behavior reduces red-hot surface risk, and the same custom voltage and power ranges (5V–240V, 100W–4000W) support specialized industrial applications requiring safe, isolated heating surfaces.

Fan Heaters

These are integrated heating assemblies paired with silent fans for home/office use. The integrated fan and PTC heating assembly provides warm air circulation, while silent fan operation addresses noise concerns in occupied spaces. Model references include 6534, 6760, and 6578, supporting inquiries for specific home/office and industrial heater specifications.

Liquid Heaters

Designed specifically for new energy vehicle coolant systems, this product line addresses NEV cabin heating efficiency issues in winter and supports reliable thermal management for cabins and batteries. The coolant system heating design integrates PTC self-limiting temperature control to reduce overheating risk, with custom voltage and power supporting diverse vehicle platform requirements.

Custom Solutions

This is the company’s OEM/ODM customization service for voltage and power configurations outside standard offerings. It directly answers the difficulty of finding non-standard sizes for specialized industrial applications, the need for rapid R&D-to-sample cycles, and the demand for direct source factory pricing. Features include voltage customization (5V–240V), power customization (100W–4000W), non-standard size support, rapid prototyping within one week, and structural optimization algorithms that improve cost efficiency.

Real-World Performance: Customer Cases

Several deployment scenarios illustrate how the PTC ceramic heating platform performs in practice:

• Data center auxiliary cabinet dehumidification: localized heating was applied to auxiliary cabinets to prevent humidity-related equipment failures.
• New energy vehicle thermal management: cabin air warming and coolant heating assemblies were deployed to support NEV thermal management needs.
• Drone battery warming: battery compartment warming was implemented to support performance in cold-weather operations.
• 3D printing chamber heating: supplemental chamber heating was used to support high-performance filament drying requirements.

Certifications and Quality Assurance

Third-party certifications backing the product line include CQC, CE, and SGS, alongside an ISO 9001:2015 quality management system. These, combined with the National High-Tech Enterprise designation, form the basis of the company’s service assurance framework for OEM/ODM and direct factory supply customers.

Business Model and Delivery

Pinghu Xuyang Electronic Technology Co., Ltd. operates on a direct source factory supply and OEM/ODM billing model, with pricing based on direct source factory rates. Implementation follows an R&D-to-sample cycle within one week, supported by an annual capacity exceeding 7 million units and a daily capacity of 20,000 sets.

Final Takeaway

For buyers evaluating a PTC heating core or constant temperature heater, the combination of automatic 280°C temperature limiting, 10,000-hour-plus service life, a 5V–240V and 100W–4000W customization range, and certifications spanning ISO 9001:2015, CQC, CE, and SGS gives a clear picture of what Warmxuyang brings to home appliance, NEV, data center, drone, and 3D printing applications alike.

https://www.warmxuyang.com/
Pinghu Xuyang Electronic Technology Co., LTD

[Author]

Posts